Click image to view full size image
POLYVINYLIDENE FLUORIDE PVDF INJECTION MOULDING
PALLET(YC N-6)
PVDF (PVDF) in fluorine plastic has the strongest toughness, low friction coefficient,
strong corrosion resistance, ageing resistance, resistance to climate, resistant to
radiation performance is good wait for a characteristic. We have developed injection,
extrusion and moulding seven colors 12 three series products.
No | Items | Unit | Index Value | Test method |
1 | Appearance |
| White semitransparent grain | / |
2 | Standard relative density | g / cm3 | 1.77-1.79 | ASTM D792,@23/23°C |
3 | Melting point | °C | 165-171 | ASTM D3418,10°C/min |
4 | MFR | g/10min | 15-25 | ASTM D1238,230°C/5kg |
5 | water absorption | % | ≤0.05 | ASTM D570 |
6 | Tensile strength | Mpa | ≥40 | ASTM D638,50mm/min@23°C |
7 | elongation | % | 5~10 | |
8 | tensile strength at break | Mpa | ≥30 | |
9 | Fracture tensile rate | % | 20~50 | |
10 | Hardness | D | 70-80 | ASTM D2240 |
YC N-6 is a kind of homopolymer granular material of polyvinylidene fluoride,
It has low melting viscosity, suitable for injection molding process of PVDF products.
Package, Transportation and Storage
1. Packed in plastic drums, and hard circular barrels outside. 25KG per drum.
2. Stored in clean, dry places, and temperature range is 5°C~30°C. Avoid contamination from dust and moisture.
3. The product is transported according to non-dangerous product; avoid heat, moisture or strong shock.
PVDF INJECTION MOULDING PELLET YC N-6(906)
